
Introduction
A brand launches a smart-looking comb set at a good price. Within a month, the reviews mention snagging and broken hair. The combs were made to the agreed shape and colour, but nobody specified how the seams on each tooth would be finished. A small ridge left by the mould was enough to undo the whole launch.
A hair comb is a simple object with a surprising number of decisions inside it, and most of them are invisible in a product photo. Style decides who will buy it, material decides how it feels and lasts, and the manufacturing method decides whether it glides or pulls. For buyers building a comb range, those three choices matter more than the logo on the handle.
Key Takeaways
· Each comb style serves a specific hair type or task, so a range should be planned around customer use rather than a supplier catalogue.
· Plastic, cellulose acetate, wood, horn and metal combs differ in feel, durability, heat tolerance and price.
· Injection-moulded combs can leave seams on the teeth, while cut-and-polished combs avoid them at a higher cost.
· Tooth spacing, tip rounding and seam finishing should be specified in writing and checked at inspection.
· In the EU, combs fall under general product safety and chemical rules, and their packaging now falls under the PPWR.
The Main Comb Styles and What Each Does
Customers search by problem, such as detangling curls or creating a clean parting, so a range should be built the same way.
Everyday and detangling combs
The main styles cover most household use.
· Wide-tooth combs have widely spaced teeth for detangling wet, thick or curly hair with less pulling.
· Fine-tooth combs have closely spaced teeth for smoothing straight hair and finishing styles.
· Dual-tooth combs combine wide and fine sections on one comb, which makes them a popular all-round choice.
· Tail combs, also called rat-tail combs, have a long thin handle for sectioning and parting hair.
Professional and specialty combs
Barber and cutting combs are thinner and more rigid, with precise markings or tooth spacing for clipper and scissor work. Picks and afro combs have long, widely spaced teeth for lifting and shaping textured hair. Beard combs and pocket combs are smaller and often sold as gifts or grooming accessories. Each of these sits in a different channel, from salon supply to gift retail.
Matching style to hair type
Hair type is the simplest way to explain a range to customers. Thick, curly and coily hair generally needs wider spacing and longer teeth, while fine and straight hair suits closer spacing. Long hair benefits from a detangling comb used from the ends upward. Writing the intended hair type on each product card makes listings clearer and cuts returns from customers who bought the wrong style.
Expert Tip: Build a comb range around three or four customer problems rather than ten shapes. A detangling comb, a styling comb, a tail comb and a pick cover most needs, and they photograph well as a set. When I see a supplier catalogue with dozens of near-identical shapes, I ask which five sell best in their export markets and start there.
Materials: From Plastic to Horn
Material is the main driver of price, feel and how long the comb survives in a bathroom.
Plastics and cellulose acetate
Most low-cost combs are injection moulded in plastics such as ABS (acrylonitrile butadiene styrene, a rigid general-purpose plastic) or PP (polypropylene, a flexible and chemical-resistant plastic). Nylon and carbon-filled blends are often used for salon combs and are marketed as heat-resistant or antistatic. Cellulose acetate (a plastic made from cellulose) is used for premium combs because it can be cut from sheet and polished to a smooth, warm finish.
Wood, bamboo and horn
Wooden and bamboo combs appeal to natural and eco-focused ranges. They need well-sealed surfaces and smooth tooth edges, because raw wood can absorb water, swell and crack. Horn combs are traditional and premium, with natural variation in colour, and they need careful finishing and storage to avoid splitting.
Natural materials also bring documentation questions. Ask the supplier to confirm the species or source of the wood or horn and any coating or oil used on it. Some markets and retail buyers ask for this information, and it is easier to collect at the sample stage than after the goods have shipped.
Metal combs, and choosing by channel
Stainless steel and aluminium combs are durable and easy to clean, which suits barbers and lice-treatment combs. Their weakness is edges. Every tooth tip and edge must be rounded and deburred (with sharp burrs removed), or the comb can scratch the scalp.
Mass retail and multipacks usually rely on moulded plastic for consistent quality at low unit cost. Salon and barber channels value rigidity, heat tolerance and precise tooth spacing. Premium beauty and gift ranges lean on acetate, wood and horn, where finish and feel justify a higher price. Picking the material by channel first keeps the range coherent and the margins realistic.
Common Mistake to Avoid: Accepting antistatic or heat-resistant claims without evidence. These claims sell combs, but they depend on the exact material blend. If the supplier cannot show a material specification or test data that supports the claim, leave it out of the listing. A claim you cannot support turns a product into a complaint the moment it underperforms.
How Combs Are Made and Why It Shows in the Teeth
Two production routes cover most combs, and the difference is visible under a fingertip.
Injection moulding
Injection moulding (injecting melted plastic into a steel mould) is fast and cheap per piece, which is why it dominates mass-market combs. Where the two halves of the mould meet, a thin line called a parting line can form along each tooth. Good factories remove it by trimming, tumbling or polishing, and good mould design places it where hair will not catch. Understanding mould making and tooling helps you ask the right questions about cavity count, steel quality and ownership.
Cavity count (the number of combs produced in each moulding cycle) affects both unit price and tooling cost. More cavities lower the price per piece but raise the mould cost, so the right choice depends on your expected volumes. If you pay for a custom mould, agree in writing that you own it and how it can be released.
Cut and polished combs
Premium combs, especially in acetate, horn and wood, are often cut from a solid sheet or block. Each tooth is cut, shaped and polished, often partly by hand. There is no mould seam, the tooth tips can be rounded individually, and the comb feels smoother in use. The trade-offs are higher unit cost, longer lead time and more variation between pieces.
Natural variation is part of the appeal of cut combs, but it still needs limits. Agree an acceptable range for colour, grain and pattern, and photograph the range on approved samples so inspectors have a clear reference.
Expert Tip: Run a fingertip and a strand of fine hair along every tooth of the sample, both directions, before approving it. Seams and burrs that are invisible in photos catch immediately. It takes a minute and catches the defect that causes most comb complaints, so I ask inspectors to repeat the same check on bulk units.
Quality Points to Specify
A comb brief should describe the comb a customer will feel, not just the comb a buyer will see.
What belongs in the specification
The following points should be written into the order and the inspection checklist.
· Tooth spacing and tooth length should be stated in millimetres for each style, with tolerances.
· Tooth tips should be rounded, and seams and burrs should be removed on every tooth.
· The comb should pass a simple flex and drop check without cracking or losing teeth.
· Colour, finish and logo position should match an approved reference sample.
Packaging and presentation
Combs scratch each other in bulk packing, so polished and dark finishes need sleeves or individual bags. Sets need inserts that hold each comb in place. Agree the packaging with the factory at the sample stage, since changes later usually mean new tooling for inserts.
Sampling and approval
Approve one signed reference sample for each style, colour and material, and keep a matching one at the factory. Ask for pre-production samples from the actual production mould or cutting process, not hand-made prototypes. A sample that was polished by hand for approval may not represent what the line produces at speed.
Common Mistake to Avoid: Inspecting combs only for colour and logo. Visual checks miss the defects that matter to customers, such as sharp tooth tips, mould seams and brittle teeth. Ask the inspector to check finish by touch, flex a sample of combs and drop a few from a realistic height. These checks take minutes and prevent the reviews that sink a listing.
Compliance and Packaging Rules in 2026
Combs are everyday consumer products, so the general rules for consumer goods apply to them.
General product safety in the EU
In 2026, combs sold to EU consumers sit under the General Product Safety Regulation (GPSR). It requires the manufacturer's name or registered trade mark and a postal and electronic address on the product, or on the packaging where that is not possible. Online offers must show the manufacturer's details and, where the manufacturer is outside the EU, a responsible person inside it.
The GPSR also requires a type, batch or serial number or another identifying element on the product, or on the packaging where the product is too small. For combs, that usually means a batch code on the packaging or a moulded mark on the handle. Agree the format with the factory before production starts.
Chemical limits for plastic parts
REACH Annex XVII limits certain polycyclic aromatic hydrocarbons (PAHs, chemicals that can occur in some plastics, rubbers and carbon-based fillers) to 1 mg/kg in rubber or plastic components that come into direct and prolonged or short-term repetitive contact with skin. Ask for a test report covering those substances, particularly for black, carbon-filled or rubber-gripped combs.
Packaging in scope
The EU Packaging and Packaging Waste Regulation has applied since 12 August 2026, with harmonised packaging labels due from 2028 and recyclability requirements from 2030. Simpler, mono-material packaging is easier to adapt as those dates approach.
Expert Tip: Ask for test reports to be issued against the exact colour and material of each comb, not one representative sample. A black carbon comb and a clear acetate comb from the same factory are different materials with different risks. Reports that cover every material in the range are the ones that stand up when a retailer or authority asks.
Building a Comb Range with NewBuyingAgent
A comb range can involve injection moulders, acetate workshops and wood specialists, each with different strengths. NewBuyingAgent is your perfect partner for global sourcing from China, backed by 30 years of expertise in trade, manufacturing and quality control.
Direct buyers often face quality uncertainty, with no guaranteed consistency in product quality. NewBuyingAgent's 20,000+ product development and QC experts ensure your products match market needs and stay high-quality. Through its sourcing services, you can use 50,000+ cooperated partner factories with no language, region or time zone barriers.
NewBuyingAgent can supply products from China across all categories at better price, quality and service, and even with its margin included, it cuts costs by 5%-10% compared with direct sourcing. Browse trending products or start at the NewBuyingAgent homepage.
Frequently Asked Questions
Which hair comb is best for curly hair?
A wide-tooth comb or pick is usually the best choice for curly and textured hair. The wide spacing detangles with less pulling, especially on wet hair. Rounded tooth tips and seam-free teeth make the biggest difference to comfort.
What is the difference between a barber comb and an ordinary comb?
A barber comb is usually thinner, straighter and more rigid, with tooth spacing designed for cutting with clippers or scissors. Ordinary combs prioritise comfort and detangling. Salon buyers also tend to expect heat tolerance and resistance to cleaning products.
Are wooden combs better than plastic combs?
They suit different customers. Wooden combs feel natural and appeal to eco-focused buyers, but they need sealing and careful finishing. Well-finished plastic and acetate combs are more uniform, easier to clean and usually cheaper.
What causes a comb to snag hair?
Usually a mould seam, a burr or a sharp tooth tip. These come from incomplete finishing after moulding or cutting. Specify seam removal and rounded tips, and check them by touch at inspection.
Do combs need testing before sale in the EU?
Yes, in practice. Combs must be safe under the GPSR, and their plastic or rubber parts must meet REACH limits such as those on PAHs. Test reports for each material give you evidence that the range complies.
Conclusion
A good hair comb comes from three clear decisions: the style that matches a real customer need, the material that fits the price and feel, and a production method finished well enough that every tooth glides. Write tooth spacing, tip rounding and seam removal into the order, test each material, and check finish by touch before shipment. If building and policing a multi-material comb range is taking more time than it should, a conversation with NewBuyingAgent about simpler, more profitable China sourcing is a sensible next step.
Sources
1. Regulation (EU) 2023/988 – General Product Safety Regulation – EUR-Lex — https://eur-lex.europa.eu/eli/reg/2023/988/oj
2. Regulation (EC) No 1907/2006 (REACH), Annex XVII entry 50 – EUR-Lex — https://eur-lex.europa.eu/eli/reg/2006/1907/oj
3. New EU rules on packaging enter into application (PPWR, Regulation (EU) 2025/40) – European Commission — https://environment.ec.europa.eu/news/new-eu-rules-packaging-enter-application-2026-08-11_en
4. New Buying Agent in China | NewBuyingAgent — https://www.newbuyingagent.com/
Commencer aujourd'hui
Transformons vos objectifs d'approvisionnement en réalitéWeChat:+86 15157124615
WhatsApp:+86 15157124615
Adresse : Bâtiment 10 #39 Xiangyuan Road, Hangzhou, Chine




